Χαρακτηριστικά


	Η διόρθωση σημείου είναι συνεχόμενη με τα κοπτικά της Mimaki. Με συνεχή ανίχνευση σημαδιών περιμετρικής κοπής στην ψηφιακή εκτύπωση, είστε σίγουροι για την τέλεια περιμετρική κοπή της δουλειά σας.
	Ενας φωτεινός κόκκινου χρώματος δείκτης βοηθά στην άμεση τοποθέτηση του υλικού σας.


Acceptable sheet / media width	9-64 cm
Effective cutting area	Normal : 58.6 cm Expand : 60.6 cm
Maximum cutting speed	CG-60SL: 70 cm/s CG-60SR: 85 cm/s
Maximum media thickness	0.25 mm
Guaranteed cutting range	58.6 cm x 2 m
Suitable media	Vinyl, fluorescent, reflective sheet, flock, (transfer) paper, rubber
Applicable tools	Cutter, ball point pen (water based and oil based), pouncing tool
Power consumption	130 VA or less
Dimensions (w x d x h)	96 cm x 43 cm x 34 cm
Weight	18 kg

		CG-60SR
Acceptable sheet width		90-740mm (roll sheet:90-640mm), 3.6" - 29.1" (3.6"- 25.2")
Effective cut area*1		Normal : 586mm x 51m (23.1" - 167') Expand : 606mm x 51m (23.8" - 167')
Maximum speed		85cm/s (33.4"/s) pen-up speed at 45°
Adjustable speed range		1-10cm/s: 1cm step (0.39"-3.94"/s: 0.39" step) 10-60cm/s: 5cm step (3.94"-2.36"/s: 2.0" step)
Repeatability		±0.2mm (excluding shrinkage/expansion caused by the film temperature)
Guaranteed cutting range		586mm x 2m (23.0" - 78.7")
Maximum cutting force		400g
Range of down pressure	Cutter	10~20g(2g step), 20~100g(5g step), 100~400g(10g step)
	Pen	10~20g(2g step), 20~100g(5g step),100~150g(10g step)
Acceptable sheet width		Marking film up to 0.25mm (0.001") thickness: Vinyl, Fluorescent type vinyl, Reflective sheet *2
Applicable tools*3		Cutter, Water based ball-point pen, Oil based ball-point pen
Command		MGL-IIc
Interface		USB
Receiver buffer size		30 MB (20MB when in sorting)
Operational conditions		5~35°C(41~95°F), 35~75%Rh, No-condensation
Power requirement		AC100V~240V Less than 100VA
Dimensions (WxDxH)		960 x 430 x 335mm (37.8" x 16.9" x 13.2")
Weight		18kg (39.7lbs.)