Mimaki κοπτικά βινυλίου CG-SRIII Series
CG-SR III Series: Extreme Curve Cutting Speed
With a host of technical improvements over previous cutters, Mimaki’s new CG-SR III range of cutting plotters features a 60 cm wide desktop model up to a 137 cm wide professional production unit. All with the capability to cut to a wider range of substrates and applications at higher speeds that ever before. By delivering a practical and cost effective solution for every sign and graphics need, the highest possible return on your investment is assured.
CG-SR III Series delivers •••
- Wider Roll cutting format for professional use
- Stunning value & highly competitive performance
- 3 different cutting widths available (606/1070/1370 mm)
- Up to 70 cm/s cutting speed
- Fast and accurate contour cutting
- Best-in-class cutting pressure of up to 500g
- Half-cut function holds image in place after cutting for perfect stickers and decals
Features of CG-SR III Series
High speed continuous register mark detection
For precise contour cutting of printed images, such as stickers, the optical sensor detects register marks that are printed on the media. By recognizing these marks, the distance to the image is calculated accurately.
By continuously detecting a maximum of 4 register marks nested images in both X and Y axis direction can be cut aligning each image automatically. Detecting one register mark is sufficient when using Mimaki’s FineCut software.
Innovative Mimaki Half-Cut function
Mimaki’s original Half-Cut function produces a series of half and die-cuts leaving a few connection points that keeps the image in place. When the job is done the sticker/image can be taken out easily or the complete sheet or roll can be sent to the customer. Various media without backing sheet can also be Half-Cut.
Segment correction function
This function detects intermediate crop marks, enabling four-point corrections for each segment. This facility ensures accurate contour cutting over longer length prints, even if the image becomes distorted.
Remote monitoring capability
Machines use an Event Notification Function to send information to pre-set e-mail addresses about completion of cutting task or errors in production, thereby enabling unattended operation and improving productivity.
Specifications of CG SR III Series
|Acceptable sheet width|
|Effective cutting area|
Cutting: 70 cm/s, Moving: 100 cm/s
|Adjustable speed range|
1 – 10 cm/s (1 cm/s step adjustment), 1 – 70 cm/s (5 cm/s step adjustment)
X direction: 2.5 μmˎY direction: 5 μm
25 μm or 10μm (MGL-IIc) / 100 μm, 50 μm (MGL-Ic1)
± 0.2 mm / 2 M
586 mm × 2 M
1,050 mm × 2M
1.350 mm × 2M
|Range ofdown pressure||Cutter|
10 – 20 g(2 g step), 20 – 100 g(5 g step), 100 – 500g(10g step)
10 – 20 g(2 g step), 20 – 100 g(5 g step), 100 – 150g(10 g step)
Vinyl sheet, Fluorescent type vinyl sheet, Reflective sheet, Rubber sheet
Cutter, Ball-point pen
|Type of command|
MGL-IIC / MGL-Ic1
|Receiver buffer size|
27 MB Standard (When sorting, 17 MB)
5 – 35 ºC, 35 – 75 %(Rh), Non-condensation
AC 100 V – 240 V, 145 VA or less
|Dimensions (W x D x H)|
1,030 × 430 × 335 mm
(1,030 × 430 × 1,185 mm)*4
1,530 × 580 × 1,150 mm
1,830 × 580 × 1,150 mm